CAY BAY–GEBE power plant is still short of approximately 8MW as work continues on Diesel Generator #12 (piston #8’s liner and rings were replaced).
GEBE engineers had found an abnormal amount of combustibles in the lube oil which they suspect was caused by a damaged piston ring. In order to inspect the piston ring they have to stop the machine and remove the piston. It turned out that not only the piston ring was damaged but also the liner and the piston head. Consequently, all parts had to be removed and replaced which proved to be rather labor intensive and time consuming. The Crew Supervisor was not optimistic that the work could be completed on Monday night and estimated that another full day of work was needed before the machine was fully reassembled and tested before resuming normal operations.
As a result, GEBE will be continuing its load shedding until the engine can be brought back online.
The following areas will be affected:
Until approximately 11.00 am: Dutch Quarter, Union Farm, Belverdere, Bishop Hill area, Dawn Beach, Tamarind Hill, Red Pond, St. Peters, South Reward, Ebenezer, Betty’s Estate, Saunders, Mary’s Fancy, S’bay Yacht club, Isle de Sol area up to the Simpson Bay bridge
From approximately 11:00 until 13:00: Sections of Belverdere, Oyster Pond, Westin Hotel area,
From approximately 11:15 until 13:15:Colebay Union Road & surrounding,
From approximately 11:30 until 13:30:St. Peters, South Reward, Waymouth Hill areas
From approximately 12:00 until 14:00: Cay Hill, Brouwers Road, Red Roses rd area
From approximately 13:00 until 14:00: Beethoven Road, Belair, Little Bay, Fort Willem
From approximately 13:00 until 15:00: Pointe Blanche, WG Buncamper Road, Vineyard area
From approximately 13:30 until 15:30: Cupecoy area, Mullet Bay area, Beacon Hill, S’bay village, Airport Road
Please note that the load shedding schedule is an indication and is subject to change based on demand in the various areas, supply from the power plant and other influencing factors. GEBE apologizes for the inconvenience and will try to restore power to the affected areas as soon as possible.
Updates will be given to the general public and the media as soon as the information becomes available.
Here are some tips to prepare for an electricity outage:
• Unplug any sensitive electronics to avoid damage.
• Turn off all lights and electrical equipment. Leave on only one light or radio to alert you when the power has been restored.
• Try to minimize the time your fridge and freezer are open to keep the cool air in.
• Gather any flashlights and check spare batteries.
Be careful if you decide to use candles. Do not leave them unattended.
Prepare by equipping your house with automatic power failure safety lighting so that it does not go dark when the power goes out. That gives you time to locate your flashlights and other items.
